Thursday, October 23, 2008

No Feathers

The people have spoken! I've gotten lots of emails on top of the poll on the 360 blog and most folks say I should ditch the feathers. Janine sums up everyone's reasoning particularly well, so I'm going to quote her here.

"I voted for leaving off the feather trim. I think it is mainly because I don't view the trim as 'matching' the rest of the piece. I also think the sheer volume of the feather trim distracts from the wizard. Janine"

So last night I reluctantly put the pretty feather trim back with the other braids, trims and ribbons, pulled out a spool of Kreinik #16 braid and started to attach that to the outside edge of the wizard. I looked at other colors, particularly a tube of Kreinik Ombre in Misty Violet (navy, silver and touches of purple), but the silver looks the best. If I'd had a spool of the #32 braid I would have used that but since I don't, I doubled the thread and am in the process of stitching both lengths along the edge.

Most folks, whether they liked the feather boa trim or not, spoke of things like "cold" or "snow" or "snowglobes" and I think the silver Kreinik is both subtle, looks good with the wizard piece colors, and also gives a wintery feel. By coincidence I traded brands of beads with LD and now have a tube of Sundance beads which are clear and faceted. They look like little ice beads and I may scatter groups of them along the edge with the silver. I won't decide that until all the braid is attached.

I'm half-way through hand sewing it on. Right now it is slow going because I have to put my hand inside the piece like a hand puppet to attach the Kreinik across the top. I will speed up when I get the top arch finished and start down the other side. I am also not couching it but am attaching the Kreink by piercing it with a tiny sharp sewing needle. You can read how this is done here in section 7 near the bottom. I'm not using the flat Kreinik ribbon but the same thing can be done with #16 and #32 braid. The main thing to remember is that your thread will be abraded by going through the Kreinik so use short lengths and when it starts looking rubbed like it might break along the length, change threads. You won't have this problem with the flat ribbon as much. It is easier to attach this way, also.

http://www.needlepoint.org/StitchOfTheMonth/2005/december/directions.php
More details on the edging challenge as I figure out what I want to do and manage to do it!

You can see the Sundance beads on their website. They are really really really nice but no one in my area carries them so I haven't stitched with them much. If I remember correctly I have the Clear in size 14.


http://www.sundancedesignsonline.com/catalog.php?Line_ID=7&Subject_ID=All&Designer_ID=All&PageFinder=1&LimitRows=3
For those who don't know already, size 14 is perfect for 18 count canvas. Read more about various bead brands and see the recommended sizes of beads for various canvas sizes here.

http://www.firesidestitchery.com/FIRESIDE/FSgeneralpages/beads.htm

Jane/Chilly Hollow
Main blog at http://blog.360.yahoo.com/chillyhollow

Tuesday, October 21, 2008

On Top, or Bottom?


Last night I drew around the base of the hollow standup wizard on paper to make a pattern. It's a bit lopsided, so I am thinking just how I should round it off, or whether I should. While I experiment with paper and scissors, I've posted a photo of the wizard with feather trim around his base. I'm dithering over whether the trim doesn't look better around the edges after all....

What do you think? I'll open a poll on the Yahoo 360 site only. Blogspot doesn't have polls so folks with an opinion who can't read Blogspot blogs or who don't have a Yahoo account so they can participate in the poll will have to email me at chilly hollowat hot maildot com.

Thanks for your opinion. Now I can't decide!

Jane/Chilly Hollow

Main blog at http://blog.360.yahoo.com/chillyhollow

Monday, October 20, 2008

Why Am I Showing My Finishing?

Why am I going over my amateur finishing step-by-step?

Not everyone wants to finish their own pieces. I hope my adventure finishing the Joan Thomasson wizard will encourage you to try finishing your own pieces, but even if you never put a thing together yourself, at least you have a better idea how it is done. Visit these websites and think about what I did with the wizard and how the stand ups they showcase look. Check the beads, braids and ribbons used as trim, check out the bases to see wooden feet and platforms, check the edges to see how smooth they are. Is the edge a seam or a wide flat area? Do the trims and buttons and bows enhance the style of the original NP or fight with it to draw attention to themselves instead of the NP? What do you like and dislike in these finishing examples? Would any of the styles look good with your current piece? Why or why not?

David McCaskill's House of Four Seasons has a lovely plain seam and corners where the building sides and roof meet.
http://www.blogger.com/Why%20am%20I%20going%20over%20my%20amateur%20finishing%20step-by-step?

Stitchery Square shows standups in a variety of styles, each suited to the theme of the piece.
http://www.stitching.com/stitcherysquare/finishing_standups.htm

Kelly Clark features boxed standups with feet made from round painted wooden beads.
http://www.kellyclarkneedlepoint.com/node/78

Marlene's showcases a huge variety of styles. Use Next at the bottom of the page to see more pages.
http://www.marlenecustompillows.com/Standing/standings1.html

Finishing is a real skill and a good finisher who can do a lot of different things and who listens to you is worth their weight in gold. If you know a bit about the various styles available, you can better explain what you want to a finisher or get a better result yourself. "Knowlege is power" isn't just a slogan, you know. Any time you notice a website with examples of their finishing, it is a very good idea to look things over carefully to get ideas or at least names of places that finish to your tastes.

Jane/Chilly Hollow
Main blog at http://blog.360.yahoo.com/chillyhollow

Sew a Fine Seam


Yesterday I hand-stitched the wizard NP canvas to the backing fabric. If it stops being pitch black before I leave for work, I'll post a photo of my progress. We basically have a hollow stand up figure with no bottom. I had planned to stitch my feather boa trim all around the edges of the needlepoint but it is too wide. Now that the wizard is standing on his own, I can see that the trim is just Too Much. I probably will leave the edges bare (gasp!) with no trim at all but encircle the base of the standup figure with the feather trim which still looks nice with the design but the clean, crisp edge seems to want to remain unadorned with any sort of trim.

I'm not a neat hand sewer, but this time I did good. I back stitched all around the edge of the needlepoint, just inside my two rows of tent stitches that encircled the background edge. Then I carefully turned the two stitched pieces inside out (you put them together with the right sides facing each other) to show the needlepoint and the front side of the backing fabric.

Since I'm not going to put any trim around the edges, the next step will be to figure out the oval shape of the base and cut that from the leftover fabric, then put wire through the Flair and bend it into the right shape and length of smoke for the cauldren. I'll attach the Flair to the back side by reaching up through the open base. The cauldron is near the wizard's feet, after all, so this shouldn't be too hard.

I'll post a photo when it is light enough to take one, but that might not be until I get home tonight. Fortunately, it usually isn't dark when I get home from work.

Jane/Chilly Hollow

Main blog at http://blog.360.yahoo.com/chillyhollow

Sunday, October 19, 2008

Wizard Supplies


Yesterday I got all the supplies together for turning the Joan Thomasson wizard into a standup piece. You can see many of them above. There's the blue polished chintz, the feather boa trim (hope you can see the silver among the feathers), the black and white copy of the stitched canvas all cut out to use as my pattern, and a mesh bag full of pebbles.

To weigh the base of the standup, I considered buckshot (which I couldn't get) and aquarium gravel (which seemed too heavy). I ended up browsing the crafts emporium's artificial flower aisles. Besides fake roses and chrysanthemums, they also sell glass bowls and pebbles, marbles and glass ovals to fill the bowls, either for display or to hold the artificial flower arrangements in place. I considered glass ovals or glass marbles but the medium-sized pebbles seemed the right weight and were inexpensive, two dollars instead of three for glass oval pebbles or glass marbles.

The rocks will weigh the base. I'll remove the tag and put them inside a plastic bag probably but not cut the mesh. They will be double-bagged, in other words. Not shown is the quilt batting and foam I'll put inside. I didn't want to get it dirty.

I've not made any more progress on this--I didn't even have time to iron the fabric yesterday, much less use the paper pattern to cut it out with an inch extra all around on all sides--but I hope to have a little more time today. Weekends are the time I am not too tired to do finishing but they also are the busiest days of the week!

Jane/Chilly Hollow

Main blog at http://blog.360.yahoo.com/chillyhollow