Saturday, September 12, 2009

Split Pavilion in Close Up



I've attached a close up of the split pavilion stitch that I am using for the Rabbit Geisha's background to help folks who want to use this stitch elsewhere.

I stitch it in horizontal rows, doing first one half of the pavilion, then in the next row doing the other half.

For the Rabbit Geisha canvas, I turned the canvas on its side so that the split lines when the canvas is upright run vertically. You can stitch it with them running horizontally if you wish.

If you guys need it diagrammed, I will do that, but it takes time, so hopefully this will be good enough.  Refer to earlier photos to see more rows underway.

Written by Jane/Chilly Hollow
Blogging at http://chillyhollownp.blogspot.com
Archived Yahoo 360 postings at http://profiles.yahoo.com/chillyhollow

The Rabbit Geisha and The Background



Today's photo shows the split pavilion stitch background I stitched last night.  I wanted enough done close to the rabbit's body so that you could get a sense of how the two interact.  By the way, the Ming Variation I thought about using is much smaller than split pavilion--four Ming Variation stitches fit in the area covered by one split pavilion.

The only thing I have started stitching besides the background is the left navy inner sleeve lining, a little right sleeve lining, and a bit of the cummberband/obi band around the rabbit's waist.  These areas are very dark navy, which has the potential to cause the same three problems on a canvas that black or other very dark colors do.

First, stitching with navy on navy (or any very dark color) is hard on aging eyes.  I have to be sure to stitch in good lighting or I can't tell where the holes are or what has been stitched already.  For me, good overhead lighting is enough but some folks put a white or red hand towel in their lap or use the lap up lights.  These lights seem to be heavy and large (in the link below the stitcher has a cushion under the light) and you should shop around. I saw better prices while searching for the best photo.
http://www.joann.com/joann/catalog.jsp?CATID=cat3248&PRODID=prd29511

Secondly, when you stitch in a very dark area next to a very light area (like the navy sleeve lining which is very close to the light blue background) you have the issue of the dark threads on the back showing through the light color,  Sometimes the knot on the back is too close to the light area and threads from that show, sometimes you are tempted to drag a dark thread from dark area #1 across light area to dark area #2 and the dark thread makes a shadow under the light area, sometimes fuzz from the dark threads gets into the light area's threads.  Just be careful.  I always start a dark thread at a point as far from a light area as possible, am careful how I end a dark thread, and if I think the dark fuzz will get into a light thread, I stitch the light area first (this issue will depend on the types of threads you use as some don't shed fuzz).

The third issue you have to confront when stitching a very dark area is that if you use a matching very dark thread, any fancy stitch you use will just disappear.  It can be a lot of work to do a textured stitch.  Do you really want that fancy stitch to not show up?

The sleeve stitch will probably be very difficult for you to see, even in the larger version of the photo.  I can barely see it myself when I look at the canvas.  I used Dotted Swiss, a very simple stitch that is just rows of alternating tent and cross stitches.  I normally stitch every other stitch as a cross stitch in the area to be stitched.  Each row has a cross stitch under the previous row's skipped stitch and vice versa.  You get a checkerboard of cross stitches when you are done, then go back and fill in the unstitched areas with tent stitch.

Why did I use a fancy stitch for this area?  Two reasons.  I choose two threads for the sleeve lining--Splendor silk in dark navy #S872 which is a perfect match for the navy paint--and Caron's Snow #17 "Carbon."  I love stitching with Snow, which is a polyester thread.  However it can unravel at the end in the needle's eye if you use a very long strand.  Caron recommends not more than a 20 inch length but I normally use just 12 inches at a time and almost never had trouble with Snow.

I didn't want to tent stitch the entire area in Snow, which is pretty sparkly.  So I did a line of tent stitches in Snow, then did my cross stitches in four plies of my Splendor so that the thicker Snow and the thinner Splendor in cross stitches were about the same height.  The sparkle is still there but it is subdued, and in very good light you can see the texture changes between dull silk and sparkly metallic.

Mixing two threads and two small stitches fancied up the sleeve lining in about the only way I could think of to do fancy in an area where fancy doesn't show up.  Hope you like it!

Written by Jane/Chilly Hollow
Blogging at http://chillyhollownp.blogspot.com
Archived Yahoo 360 postings at http://profiles.yahoo.com/chillyhollow

Friday, September 11, 2009

Another Pair of Stitching Sisters



Remember my interviews with twin sisters Eileen Aird (owner of the Ridgewood Needlepoint shop) and Elizabeth Hess (owner of Needlepoint Broad painted canvases)?  I've found another pair of sisters in the business, Cindy of Cindy's Needle Art and Randi of Sew Much Fun.  Cindy's shop is in Canada but she has an online store.
http://www.cindysneedleart.com/

Here's a brief interview Cindy did with her sister about the Sew Much Fun line.
http://www.cindysneedleart.com/index_files/aboutus.htm

And here are some of the Sew Much Fun designs for your viewing pleasure. (Prices are in Canadian dollars if you fall in love.)
http://www.cindysneedleart.com/index_files/other.htm

Many thanks to the Spinster Stitcher who is going to stitch one of the frog designs from Sew Much Fun.  I got curious and tried to find a photo of the canvas online only to discover this interview and all the interesting designs that the shop sells.
http://spinsterstitcher.blogspot.com/2009/09/provenance-of-ms-lily-frog-her-very.html

Written by Jane/Chilly Hollow
Blogging at http://chillyhollownp.blogspot.com
Archived Yahoo 360 postings at http://profiles.yahoo.com/chillyhollow

Auditions and Rehearsals



I've been talking exclusively about repairing the burn damage
on Rabbit Geisha but there is another area in this canvas that gave me a lot of worry--how plain it is.

If you look at the photo in the left column of the entire unstitched canvas, you see that the design has these elements:  the rabbit face and hands, the two ribbons and the tassel, the decorative sleeves, the over tunic and the under robe, and finally the blue background.  Each of these main elements has other things in it (one ribbon is gold edged and the other is not; the tunic has a curved line and dot trim) but those decorative bits are fairly sparse.

This is a problem for me as I usually look at those decorative elements as well as the shape of the area I am going to stitch to get ideas for stitches.   The only real decoration is the fan shapes on the sleeves.  I think the squiggles and dots on the over tunic are not really large enough to base anything on.  So this canvas is a pretty open one without much to help me decide on stitches that'll look good.

I had to do a LOT of test stitching which you'll see in the photo above.  Those are mostly stitches I was auditioning for the part of Background Stitch.  The entire canvas is 7x13 inches, which means it is tall and thin.  So I looked for tall stitches like the double column in the middle of the design or the interlocking L shapes in the upper right hand corner.  I also decided to try the Ming Variation stitch that failed to work out in the sky so spectacularly on my South Seas Fiji ornament.  I really like Ming Variation (it is the second row of stitches from the top) but once again it turned out to be not right for the part.

I got fairly desperate and tried a lot of things before I came up with the split pavilion stitch I am using for the background.  First, here is the normal pavilion stitch.
http://www.needlepoint.org/StitchOfTheMonth/2001/01-08j.php

I saw a lovely version of this in one of Brenda Hart's books (Favorite Stitches, page 31, split diamond variation).  In my test stitching it is to the left of the double column stitch and is offset split pavilions with each row separated by a complex row or two of horizontal stitches.  I knew that as Miss I Can't Count To Ten Successfully, I'd never get this stitch right so I experimented to find a variation of it that was easier.  The two small split pavilions diagonally below Brenda's complicated version were what I came up with but they are too small in scale.  They just are too little for this large canvas.  I tried again and you see the larger split pavilions underneath the other versions in the second row from the bottom.

That's what I went with, turning the canvas so I could work these in a vertical manner, and doing a row of the top halves of the split pavilions, then coming back the other way with a row of the bottom half.  These all interlock nicely as you see below.


This stitch takes a lot of thread so I'm going to have to buy more DMC cotton floss.  I have three skeins of color 794, all of which I bought this week as the skein I had in the right color is Anchor and I can't buy Anchor locally (note to self:  update the total stash credits) but the area above already has used up one of them.  To be fair, I am also using the same thread for the three rows of tent stitch around the perimeter which also eats up a lot of thread.  I think I'll need 8-9 skeins of DMC 794 to do the background.  Better go shopping!

By the way, once I chose the right stitch in auditions, I had to do rehearsals to know how many threads I needed to look good on 18 count.  I ended up with four plies in my background split pavilions and four also in my tent stitches.

Written by Jane/Chilly Hollow
Blogging at http://chillyhollownp.blogspot.com
Archived Yahoo 360 postings at http://profiles.yahoo.com/chillyhollow

Thursday, September 10, 2009

Mending the Rabbit Geisha with a Weave (and Water)



I have been rather busy (i.e., no stitching H-Q rows of the May stitch on Glittering Kimono) with the Rabbit Geisha's burned places.  Yesterday I showed you the patched areas.  Look back at the very last photo in yesterday's blog entry and you will see that there is a distinct dip in the burn hole area, with the scorched canvas well above the patch on the back side. Any stitches put on top of this are likely to have a dimple in them because there is a hole.  So I used another technique to handle this problem--weaving.


Patching is not the only way to mend canvas.  You can also pull away a thread from the edge of your canvas and weave it across the area.  In the photo above you'll see that I have done this.  I used a #20 needle so that the loose canvas thread would go through the eye and wove the thread to build up support.  I also started my background stitch over the burned corner area, just to see how it would work up.  First, I did two rows of basketweave outside the painted canvas area.  This stabilizes the patches a bit more and also will be useful in finishing.   However, another problem cropped up as I worked.


Look very carefully at this close up of the same photo.  See where the burned NP canvas threads broke as I stitched through them?  This is one reason I put the patches on the back.  I had no idea how stable the scorched canvas would be.  Before I did any more stitching, I grabbed my plant mister and sprayed the canvas.  (The thread I am using for my background stitches is DMC #794 and since most DMC colors are pretty stable--except for red and very very dark colors like navy and chocolate--I risked the color running.)  Once the burned canvas and the patch were damp and more flexible, I continued stitching the background over the burned corner.  The more flexible damp canvas (I didn't get it really wet, just flexible) took the stitches better and this morning when the spot is dry I don't see any more broken stitches.  There might be some under the stitching and the patch, though.


This photo shows what the corner looks like stitched.  Note that some of the brown burn shows between the stitches.  Someone asked (Was that you, Nancy?) in the Comments if I planned to repaint the burned area.  The answer is no.  I have no idea how burned canvas will take to paint or a marker so I won't risk that.  We'll see how prominent the burned areas are after stitching.  I may scatter beads on top to distract the eyes (beads hide a LOT of sins!) or maybe the finisher will use trim or something similar to hide this.  We'll worry about it later.  The first step is to get the background stitches in successfully.


The final photograph also shows that I pulled out my woven canvas thread and restitched it vertically instead of horizontally to better support my horizontal stitches.  I made sure to dampen this area and to soak the thread I was going to weave with to make it very flexible.  I also added another row of tent stitches around the outside as I realized that I had miscounted the background.  I didn't want to compensate.  Besides, three rows of tent stitches are probably better for the patched areas as that is where the finishing stitches will go.

Written by Jane/Chilly Hollow
Blogging at http://chillyhollownp.blogspot.com
Archived Yahoo 360 postings at http://profiles.yahoo.com/chillyhollow