Showing posts with label Surfin Santa. Show all posts
Showing posts with label Surfin Santa. Show all posts

Tuesday, January 12, 2010

Surfin Santa is Done!



Surfin Santa is done!  The repair looks normal, and the edging all trimmed out.  In retrospect, I probably should have used the gold metallic in the Joan Thomasson kit instead of the metallic blue which was so pretty, I failed to think about how gold stitches crammed on top would alter the look.  But I do love Santa regardless and enjoyed stitching him greatly.

Joan Thomasson does wonderful designs and her kits are fun, fairly quick to stitch, and easy to finish (if you remember to do ALL the stitches first).

Written by Jane/Chilly Hollow
Blogging at http://chillyhollownp.blogspot.com
Archived Yahoo 360 postings at http://profiles.yahoo.com/chillyhollow

Monday, January 11, 2010

Santa's Surfboard Repair



Fixing the stitches I took out of Santa's surfboard and forgot about until after the ornament was assembled was actually quite easy.   I pulled out my stash of specialty needles and choose a curved needle (it's on the right -- or it was before Google erased a bunch of photos here on Blog!) and a double-ended tapestry needle.  I figured that these would be more useful than a regular tapestry needle for stitching the empty two stitches back on the canvas.

Remember, I have felt backing glued onto the ornament.  That means that my needle can go right through the felt without having to pass through any sort of padding or stiffener.  I threaded up my double-ended needle (the eye is in the middle) with three plies of the medium brown DMC floss I stitched this area.  I made sure I cut a long length of floss, around 18 inches.  One never knows how much thread one will need in these situations and too much is better than not enough.

Then I stuck my needle tip into the bottom of the first stitch and pushed it through to the back at a sharp angle so that the needle would come out the back side close to the edge.  Once the needle came out the back side, I took the needle off the thread and adjusted it so that I had plenty of thread on both the front and the back.  Then I threaded up my needle again and inserted it in the top hole of the first stitch and down to the bottom hole of the second stitch.  

Pulling carefully on my thread, I tightened the first stitch into position, added by my laying tool, as I pulled up on the needle to bring the thread up from the hole of the second stitch.  Then I plunged my needle down through the canvas and the felt backing to end the second stitch.  Again, I used my laying tool to smooth the stitch into position as I pulled.  The needle's exit point on the back side was also angled away from the two stitches toward the edge of the ornament.

At this point, the front of the ornament looked normal but if I flipped it over, two thread tails stuck out of the back of the felt.  I pulled each thread snug (being careful to not disturb the two new stitches on the front) and clipped each close to the felt.  The cut end pops back under the felt if you clip it while pulling up on the thread tail slightly.  Remember, you don't want to disturb the stitches on the front side, so don't yank the thread tails.

The two stitches are not as secure as their neighbors but they look just like all the rest on the front.  If necessary, I can repair this canvas again, too.

I am not the first person to find missing stitches or have to repair a finished piece, and I won't be the last.  You can read about Amy Bunger's reattaching a bell that came off a finished stand-up elephant piece in her Kelly Clark Nativity set when it came back from being on exhibit at the Milwaukee Seminar here.
http://www.amybunger.com/f/Amy_s_e-newsletter_August_2009.pdf

These things are not the end of the world.  Using specialty needles like the curved ones above (although I probably could have used a plain long beading needle) and a little spare thread, you can fix these problems.  You just have to think through what you want to do and how it is likely to work.

Written by Jane/Chilly Hollow
Blogging at http://chillyhollownp.blogspot.com
Archived Yahoo 360 postings at http://profiles.yahoo.com/chillyhollow

Saturday, January 9, 2010

Why God Invented Weird Needles






Here are the weird needles.  Check out the area to the left of Santa's heel to see the stitches I took out to replace and forgot about.

Details on Monday.  I should have stopped crying by then....

This is what I did instead of working on Santa.




Written by Jane/Chilly Hollow
Blogging at http://chillyhollownp.blogspot.com
Archived Yahoo 360 postings at http://profiles.yahoo.com/chillyhollow

Monday, January 4, 2010

Santa is Still Drying



Yesterday I didn't get much done on Surfin Santa.  I'd forgotten that when I glued the hanger thread to his hands that would need to dry.  So I glued the gold metallic from my Joan Thomasosn kit between the stitched NP and the felt backing on each hand and left it for 6 hours.  Then I added a bit more glue between the canvas and the backing so that the front and back were glued together now that the thread was added.  I trimmed away the excess unstitched canvas and the felt this morning.  He's waiting until I get time to start sewing on the gold thread trim around the edges, probably tonight.

Written by Jane/Chilly Hollow
Blogging at http://chillyhollownp.blogspot.com
Archived Yahoo 360 postings at http://profiles.yahoo.com/chillyhollow

Sunday, January 3, 2010

Surfin' Santa All Stitched



Joan Thomasson's Surfin Santa is all stitched, glued to his felt backing and ready to be made up.  You can see the finished lei I talked about yesterday in the photo of the completed ornament.  The small angel and small Santa kits that Joan sells are really fast stitches.  I know this was a holiday week and I had more stitching time but still, he came to life in just over a week.

The kits come with felt backing, a long length of gold metallic thread to use as trim and to make a loop to hang this ornament, and finishing instructions.  It is really easy to do.

Step one: Put your long hair up.  This is essential unless you like glue in your hair.

Step two:  Cover your work surface with waxed paper.  This is essential unless you like glue on your dining room table.

Step three:  Lay your felt good side down on the waxed paper and lay Surfin Santa, also good side down, on the paper next to the felt.

Step four:  Put glue (I used Aileen's Tacky Fabric Glue which dries clear) all around the edge of the ornament's back side.  You won't be able to get too close to the edge but that's ok.

Step five:  Smear the glue line to the very edge and beyond a bit to the unstitched canvas with your finger.  Note that I did not put glue on either hand as I plan to attach a loop of metallic to each hand to hang Surfin Santa.  I'll have to sew the loop inside the needlepoint and felt and then add more glue with a toothpick to seal the hands tight.  Then he will have to dry overnight again before I dare hang him anywhere.

Step six:  CAREFULLY flip Surfin Santa over and lay him right on the felt's back side and mash hard.  You have not trimmed the canvas at all, mind, but since Joan includes a piece of felt the size of the entire canvas, you can easily center Santa on the backing fabric.

Step seven:  Wash your hands to get the wet glue off your fingers.  Dry your hands and mash down on Santa again.  Put waxed paper on top of him and weigh him down with a heavy book or something similar for at least 3-4 hours to dry.  I left him overnight to dry myself.

Step eight:  Cut out the glued ornament right to the edge of the stitching.  Don't use your good scissors because cutting through NP canvas glued to felt will dull your good embroidery scissors right quick.




Step nine:  Trim any little bits of bare canvas or not totally cut felt with your good scissors.  I am going to do this today after having left Surfin Santa to sit overnight.  The photo above shows him cut off but not carefully trimmed yet.  Note that I did not cut out around his hands as there is no glue there.  That will wait until I attach the two ends of the hanging loop.

Step ten:  Attached the gold metallic cord all around the edge.  Joan says to glue it but I prefer to hand stitch the cord on.  I'll be working on this today.

Written by Jane/Chilly Hollow
Blogging at http://chillyhollownp.blogspot.com
Archived Yahoo 360 postings at http://profiles.yahoo.com/chillyhollow

Santa's Lei



I'm reposting yesterday's photo of Santa on his surfboard because I'd started on the lei in this photograph.  (Sorry, Google is randomly deleting photos and many of them I cannot replace.). See how I have done 5 "spokes" on the painted flowers?  That's how I start on each flower. I used three colors of ribbon floss for the flowers.  This thread is ribbon-like and does twist so I used a laying tool to keep the "petal" stitches flat when I did the first 5 or so stitches.  They are spaced out so that I can see exactly the margins of the flowers.  I'm doing these stitches like an eyelet stitch, coming up at the outside edge of each flower and then going down into the same center hole for each stitch.  Ribbon floss is thin, so the center hole isn't enlarged much but if I was using another thread, I might have to poke the tip of my scissor blade into the center to make room for all the threads before starting to stitch a flower.

The next step is to fill in the flowers by adding more petals.  This time I didn't always use the laying tool as a twisted stitch adds dimension.  You can see that one flower was made using both orange and yellow stitches.  I only wanted one multi-colored flower and I stuck it in the back side so that it wasn't prominent.  I tried to space out my three colors of flowers so that I did not have too much of one color in an area.  The flowers are the focal point of this design and brighten it up since I muted the Hawaiian shirt colors and Santa's got a white beard and rides a brown surfboard. Even the waves and water don't add a great deal of color as green is a neutral.  So I needed LOUD flowers.



This is an earlier photo of the lei but it shows the French knots I put in the centers well.  I also did two bullions, but they are harder to do with ribbon floss and also a bit too much to be in every single flower in my opinion.

By the way, I forgot yesterday to add that I'd put a sleeve cuff on Santa's Hawaiian shirt.  It's just a long stitch wrapped over and over again in the same purple DMC floss that I used in the shirt.

Tomorrow you'll see a finished photo of this ornament including the lei and after that I'll talk about how Joan Thomasson says to finish it.

Written by Jane/Chilly Hollow
Blogging at http://chillyhollownp.blogspot.com
Archived Yahoo 360 postings at http://profiles.yahoo.com/chillyhollow

Saturday, January 2, 2010

Surfboard and Surf



Surfin' Santa is a small piece, maybe 6 inches high and 5 wide at the base.  So he doesn't take long to stitch.  Above you see he has faded cut off jeans (split stitch in Needle Necessities' Madras), a stitched surfboard (Byzantine stitch using three plies of the two shades of brown DMC floss from the Surfin Santa kit),  green water (random long diagonal stitches using the two shades of teal green DMC floss and the blue green metallic from the kit) and white French knot foam (in the white DMC floss from the kit plus some shading using the white-touched-with green and silver Kreinik metallic).  I also have stitched his hair and beard using the white Medici from the kit supplemented with some light gray Medici from my stash.

I've also given him a bracelet using a length of chocolate milk colored Kreinik #16 braid and have started on his lei.  I'll talk about the lei tomorrow but it is basically eyelet stitches done in ribbon floss.

He's coming along nicely!

Written by Jane/Chilly Hollow
Blogging at http://chillyhollownp.blogspot.com
Archived Yahoo 360 postings at http://profiles.yahoo.com/chillyhollow

Friday, January 1, 2010

Santa's Sunglasses




Joan Thomasson's Hawaiian Santa needed sunglasses and I wanted him to have heavy black framed ones like the ones my youngest brother wears since this is for him.

The first thing I did was to tent stitch the glass part of the sunglasses with navy blue Water N Ice, using the kit's enclosed light blue/green metallic for the highlights where the sun hits the sunglasses.  Then I pulled out my black DMC memory thread and cut off a 4-5 inch length.

DMC memory thread is actually thin copper wire wrapped with DMC thread.  You can read more about it here at the DMC website.
http://www.dmc.com/majic/pageServer/0k010101l7/en_GB/Desire-memory-thread.html

This was my first time actually using the thread that DMC kindly sent me to try out.  It is a lot more flexible than I expected it to be, so it was very easy for me to twist it into a rough figure 8 shape, then bent it a bit with the eraser end of a pencil to the exact shape I needed.

As you can see from the long end on the left, the cut end does unravel a bit, so I was careful to cut plenty of this stuff.  I ended up cutting off the short end under the earpiece knot I made and keeping it from unraveling with a dot of my fabric glue.  After that dried, I had to enlarge the hole in the canvas for the long end to go in, but it was easy to couch down the glasses on the front with black DMC cotton floss and easy to tied down the long end on the back with the same thread. After that, I trimmed down the long loose end a bit on the back side and Santa has his sunglasses.

DMC memory thread is certainly something I'll use again.  I have a SharonG bra and tap pants set in my stash I plan to work soon and memory thread (perhaps in silver?) will make a great coat hanger.
http://www.sharong.com/catalog/bras/index.html

Written by Jane/Chilly Hollow
Blogging at http://chillyhollownp.blogspot.com
Archived Yahoo 360 postings at http://profiles.yahoo.com/chillyhollow

Thursday, December 31, 2009

Introducing Joan Thomasson's Surfin Santa



I am a big fan of Joan Thomasson's small angel and Santa designs.  I must own 6-8 of her angels, particularly the slightly naughty ones, and I have 2-3 of her Santas in my stash, too.  If you were visiting Blog last year, you saw me stitch Joan's large stand up Wizard Santa for my niece for Christmas.   To see the range of designs Joan offers as kits and stand-alone small painted canvases, browse the Catalogue category of her website.  Very talented lady!
http://www.stitchinstuff.com/

The kits are great fun to stitch.  They come with a page of instructions, two pages of diagramed stitches, and all the threads you need as well as a photograph of the finished model.  Most kits have the backing felt and instructions to make up the ornament, and some kits also include a charm like the brass lock that Wizard Santa had for his trunk of magic.  So when I wanted something quick and easy and as different as possible from O'jishi, I pulled out my stash of Joan Thomasson angels and Santas and choose a particularly fun one, Surfin Santa!



I'm going to stitch Surfin Santa as an ornament for a brother for next year's Christmas using some of the DMC cotton floss and metallic threads included in the kit supplemented by threads from my stash.  You see, my brother wouldn't be caught dead wearing a red floral shirt so I'm going to have to change that right away to something more neutral and muted--the sort of shirt his wife and daughters might buy for him on a Hawaiian vacation and force him to wear.  LOL

The changed shirt version is underway above, and Santa's already wearing heavy black sunglasses (a style my brother favors).  Tomorrow I'll talk about how I stitched those sunglasses for Joe Cool Santa.  LOL

This is really going to be fun!

Written by Jane/Chilly Hollow
Blogging at http://chillyhollownp.blogspot.com
Archived Yahoo 360 postings at http://profiles.yahoo.com/chillyhollow